[Elecraft] K3 question/problem

[Toby Deinhardt]

Hi Cary,


 > I hesitate to put this question on the reflector

This what the reflector is for!


 > apparently my signal is about 500 hertz higher

You ought to double check which filters you have set up for TX for each 
mode. It sounds to me as if you might have a small fubar in your filter 
settings. When in doubt, use the 2.7kHz (or the 2.8khz, as the case may 
be) for all modes apart from AM. Here you need to use the 6kHz filter, 
if you have it.

Also double check that you do not have + and - mixed up on the filter 
offsets. AFAIK no filter offsets are needed for the 8 pole filters.


Happy New Year.

toby
-- 
DD5FZ (ex 4n6fz, dj7mgq, dg5mgq, dd5fz)
K2/10  #885
K2/100 #3248
K3/100 #67
DOK C12, BCC, DL-QRP-AG, JN58td