[Elecraft] K3 firmware upgrade 1.55

[Bill NY9H]

ed is correct....

check the schematic  you'll see that there are components still in 
line  when in bypass.

bill

At 10:23 AM 12/30/2007, Ed K1EP wrote:
>If I recall, according the Aptos, there is capacitance/inductance 
>left in when it says Bypass to match the impedance of the bypassing 
>ATU circuitry.
>
>At 12/30/2007 10:53 AM, David Ferrington, M0XDF wrote:
>>Yes, as far as I know
>>
>>
>>On 30/12/07 15:43, "David Andrews" <david at violinman.co.uk> sent:
>> > Advice please - the ATU BYPASS feature - is it a real bypass leaving no
>> > stray capacitance or inductance in the path (unlike the K2)?
>>--
>>Everything secret degenerates, even the administration of justice; nothing
>>is safe that does not show how it can bear discussion and publicity.
>>-Lord Acton, historian (1834-1902)
>>
>>
>>_______________________________________________
>>Elecraft mailing list
>>Post to: Elecraft at mailman.qth.net
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com