[Elecraft] K3 ERR TXG

[David Ferrington, M0XDF]

As per owners manual

Transmit gain constant out of range.
This usually indicates a problem with band-pass filter alignment or one of
the low-pass filters. In either case it could affect one or two bands. See
service manual.

(just been working on
<http://www.zerobeat.net/mediawiki/index.php/K3_Firmware_Error_codes> :)


On 30/12/07 13:10, "Rowland" <rowland at g4apo.fslife.co.uk> sent:

> I have installed my Xmas present  the KPA3 into K3 36
> All seems to be OK apart from an error message, ERR TXG on the 30m band
> only.
> Other bands seem OK and acting as should.
> When trying to transmit into a dummy load 50Ohm  I get no power out and
> hear a 200Hz or so whine coming from the rig.
> 
> The manual says that usually indicates a problem with band-pass foilter
> alignment or one of the low pass filters. See Service manual.
> 
> Anyone any ideas please.
> I guess elecraft tech help not available today.
> 
> Thanks
> Rowland
> G4APO

-- 
The high minded man must care more for the truth than for what people
think. -Aristotle, philosopher (384-322 BCE)