[Elecraft] Re: Err TXF on 7.077 - resolved

[David Ferrington, M0XDF]

Yep - it was me - somehow, I was trying to tx LSB via a 400Hz  - now I know
I set that correctly - I checked it 3 times


On 28/12/07 21:20, "David Ferrington, M0XDF" <M0XDF at Alphadene.co.uk> sent:

> In fact, it gives me ERR TXF on a lot of freq I try to transmit on into a
> dummy load at  5W
> 
> So this has to be something stupicd I'm doing, but heaven knows what
> 
> 
> On 28/12/07 21:09, "David Ferrington, M0XDF" <M0XDF at Alphadene.co.uk> sent:
> 
>> I just tried to make my first QSO (s/n 174 K3/100) - I get ERR TXF when
>> trying 
>> to transmit on 7.077 LSB at 5.0w using Proset K2, via AD-1-K adapter into
>> front connector with Mic Sel set to FP.L Bias
>> 
>> Selecting bypass ATU and TUNE to my SG-237  appears to work ok, an ext.
>> Watt/SWR meter shows it transmitting and the SGC tunes ok.
>> 
>> Must be something I'm doing, but haven't the faintest what it is

-- 
Now, here, you see, it takes all the running you can do, to keep in the
same place. If you want to get somewhere else, you must run at least twice
as fast as that! -Lewis Carroll, mathematician and writer (1832-1898)