[Elecraft] K3 - PSK31

[David Yarnes]

But it does work pretty well on RTTY just using CW for input.  I've tried it 
a few times, and it's kind of fun!  For sure it would be better with a 
computer, but being able to do it "sans" computer can be pretty handy at 
times.  It's another good reason to bone up on your CW skills if you haven't 
been giving it much attention.  If you don't send too well though, this may 
not be a feature you will enjoy.  Remember, the radio has to be able to read 
what you send in order to convert it to RTTY.

Dave W7AQK

----- Original Message ----- 
From: "Vic K2VCO" <vic at rakefet.com>
To: <n9vx at myway.com>
Cc: <elecraft at mailman.qth.net>
Sent: Wednesday, December 26, 2007 7:55 PM
Subject: Re: [Elecraft] K3 - PSK31


> Joe wrote:
>> Can you connect a PC keyboard, without a computer, to the K3 and
>> work/enter PSK31? I understand it will decode PSK31.
>
> No. You can send RTTY and PSK from the K3 by sending CW with a paddle. It 
> does decode both modes, displaying the text in the VFO B area.
>
> If you want to send digital modes with a keyboard, though, you still need 
> a computer.
> -- 
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>