[Elecraft] Re: K2 AGC THRESHOLD

[Jim Stoneback]

I had the same problem; could only get 3.7 v with R1 cranked all the way to 
the stop.  My 8v regulator put out 7.9 v.  At the suggestion of one of the 
older hands, I calculated the voltage divider and confirming that 3.7v was 
about as high as I was going to get with that regulator voltage output.  I 
put off changing the regulator out, though, because the AGC action is just 
about perfect as is.   One day,  when I'm scratching around for something to 
do, I may replace it.  I do love this radio.

73,  Jim

Jim Stoneback
K4AXF
Drake SW8
K2.ssb.100.at sn 6194
K2.160.at sn 6263

On 12/13/07, bill KE5KWE <bdfogel at yahoo.com> wrote:
>
> Hello All:
>
> This probably has been asked and answered before but I couldn't find it in
> the archives.  I Set the AGC Threshold and could only get 3.644 volts out 
> of
> R1 the potentiometer.  Should I be concerned that I did not get 3.80 volts 
> ?
>
> Thanks for the help.
>
> Bill
> KE5KWE
> --
> View this message in context: 
> http://www.nabble.com/K2-AGC-THRESHOLD-tp14329860p14329860.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>