[Elecraft] K2 AGC THRESHOLD

[Sarah K.]

Hmm, I went through that a couple weeks ago and I ended up needing to
replace the 8-volt regulator. Elecraft sent me a new one. Check the
output voltage on the 8-volt regulator (LM2930T-8) and see how close
it is to 8 volts.

I'll be interested to see what the more experienced builders have to
say about this... I wouldn't have thought it would be all that common
a problem!

Sarah AF6FH


On 12/13/07, bill KE5KWE <bdfogel at yahoo.com> wrote:
>
> Hello All:
>
> This probably has been asked and answered before but I couldn't find it in
> the archives.  I Set the AGC Threshold and could only get 3.644 volts out of
> R1 the potentiometer.  Should I be concerned that I did not get 3.80 volts ?
>
> Thanks for the help.
>
> Bill
> KE5KWE
> --
> View this message in context: http://www.nabble.com/K2-AGC-THRESHOLD-tp14329860p14329860.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>