[Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

[Dick Dievendorff]

I can't make promises, but it has a very good chance of working well.
Keyspan has a pretty good reputation.  I have one here that I'm going to
test with a couple of computers.

My experience has been that all USB adapters will work with some computers,
and no USB adapters will work with all computers.  My experience with serial
ports is that they tend to be much more robust.  

I'm continuing to make improvements in USB to Serial Adapter error recovery
which help with some marginal cases. 

I'll send another note after I've done my testing with a Sony Vaio laptop I
have here as well as my desktop system. 

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Reiser
Sent: Tuesday, December 11, 2007 1:32 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

Hello,

Can anyone tell me definitively whether or not my Keyspan USB-to-serial-port
adapter will be suitable for downloading the K3 firmware updates?

Thanks and 73,

John, W2GW

(2nd run K3 - May 29th) 
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com