[Elecraft] FW: K60XV no tx power problem

[Stephen Prior]

David, many thanks!

You were very close - I had inadvertently soldered the centre of the coax at
J13 to the little hole next to hole X, not hole X itself.  All working now,
covers going back on!

Thanks a lot

73 Stephen


On 9/12/07 21:48, "David Pratt" <david at g4dmp.co.uk> wrote:

> In a recent message, Stephen Prior <sjp at sjprior.fsnet.co.uk> wrote ...
>> One more thing I have just noticed - I do have power out on ssb, about 20W
>> as measured externally, but the power control still does not have any
>> effect.  On Tune and CW, there is no externally measure power output on any
>> band, whatever the position of the power control.
>> 
>> What have I done?!  :-((
> 
> My guess is that it is something to do with the connection of the
> screened cable connecting the two pads on the underside of the main
> board. Make sure you have the connections at the right places. I seem to
> remember this was quite tricky to get right.  I think it's just a matter
> of rechecking the installation steps on page 9 of the manual (in my Rev
> A March 15 2004).  Good luck and let us know when you find the problem.
> 
> 73