[Elecraft] On a more technical note.....

[Bill NY9H]

the new 10 watt lpa....

Not that I plan on taking the bottom off frequently,
It's ALOT BETTER AND EASIER THAN THE K2,,,,
......and as I did it could only think of the k2's lpa procedure,,,,,

bill #44

>While we're talking disassembly, let me point out that Wayne specifically
>avoided needing thermal pads or complicated hardware stacks anywhere on the
>K3 bottom cover assembly even though the rear section is the heat sink for
>the 10-watt low power amplifier (LPA) module. Pulling the bottom covers is
>simply a matter of removing screws and  lifting the covers off. Reinstalling
>the covers involves setting them in place and putting all the screws back