[Elecraft] K2 and scanning frequencies

[David Wilburn]

I have read through page 103 of the 'G' manual serveral times now,
things do not seem to be working out.  I was hoping to setup two
frequencies, either in memory or with the VFOs, and scan between them.

I have setup VFOA for freqA and VFOB for freqB, and then held STORE, and
then selected and held a number until SCAN is displayed.  If I had two
frequencies in the memory for that same band, it then scanned JUST those
to frequencies.  If I did not have any frequencies on that band in
memory, it then 'scanned' the one frequency I put it.

I then did the same thing, and held down the number key until I got AF
ON, and the same thing happend.

If I placed the two frequencies in spots 1 and 2, and then did this, it
would scan the frequencies, hopping between them.

My goal is to scan everything from freqA to freqB and back,
continuously.  I must be missing something obvious.
-- 

David Wilburn
k4dgw at k4dgw.com
K4DGW
K2 S/N 5982