[Elecraft] microHAM K3 cables ...

[Joe Subich, W4TV]

> Can you explain the note that says "!!Must be used with MH2 
> MG2 or Proset-K2?"

It means that the cables (and microHAM interfaces for Elecraft) 
must be used with radios and microphones wired according to the 
"Kenwood" standard.  The original K2 had programmable mic jumpers 
and the Elecraft cable sets would only work when the mic/radio 
were wired for the MH2, MG2 or Proset-K2.  

The K3 is "hard wired" for Kenwood style mics - the considerations 
are the same.  OEM microphones (MH2, Proset-k2) or identically 
wired microphones must be used with the microham interfaces. 

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support at microham.com 
 


> -----Original Message-----
> From: K4IA at aol.com [mailto:K4IA at aol.com] 
> Sent: Wednesday, December 05, 2007 9:21 PM
> To: w4tv at subich.com; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] microHAM K3 cables ... 
> 
> 
> Joe -
> 
> Can you explain the note that says "!!Must be used with MH2 
> MG2 or Proset-K2?"
> 
> Does this mean I can not use it with the Heil Goldline with 
> the dual elements? 
> 
> k4ia
> Craig "Buck"
> Fredericksburg, Virginia USA
>