[Elecraft] K1 4 band or 2 band

[Don Wilhelm]

Allan,

OK, I am sending this direct, but also to the list - others may be 
interested even if it is not a K3 entry.

Since you find 'b1' in the menu, the procedure is to press (hold) EDIT 
until the display changes - it should indicate 7.0, 10.0, 10.1, 14.0, 
21.0 etc.  Do you get that display?
You should no longer be holding the EDIT button at this point - and the 
WPM+/WPM- buttons will allow you to select whichever band you want to 
have assigned to b1.  After you have b1 set, tap the MENU button once to 
return to the 'b1' display, then you can tap the BAND button to change 
to 'b2' or b3 or b4 and set those in the same manner.

Tell us what you observe in the display when you have trouble.

73,
Don W3FPR

Allan Glasdam wrote:
> Hope somebody on the net has time to help me with this problem:
> Band assignment 2 band . I find "b1" (page 39 left coloumn) but cannot 
> select another band holding EDIT and using WPM+/WPM-.
> Any hints where to start ??
> Please off list as answers will drown in K3 !
>