[Elecraft] K3/100 + DX4WIN & N1MM

[Vic K2VCO]

Don Nesbitt wrote:
> Yep - this is true - not only that, but be aware if you are using DTR/RTS to
> send code from N1MM (I presume other software as well) that even if you have
> NOT turned VOX to the ON position on the K3, the DTR/RTS keying in
> conjunction with ENABLING the PTT control in N1MM Config, will put your RF
> into the ether when N1MM Function keys are used!  Nice - but - read on:
> 
> Then, when you reach for your paddle to send a correction nothing will make
> it to the air UNLESS you have enabled VOX on the K3!  You will wonder why
> the other station keeps asking and finally gives up!  Been there, done that
> and have the T-shirt!  73 -- Don

If you just enable DTR for CW and *not* RTS for PTT, you can avoid this! 
The K3 works just fine this way.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco