[Elecraft] KIO2: Programming message memories not possible?

[Joe Subich, W4TV]

> Unfortunately, this command is K2 unique and is not supported 
> by any of the popular rig control programs - but if you are 
> writing your own app, 

The KY command is also supported by the TS-2000, TS-480, TS-870 
and TS-570.  

KY is used by WinWarbler (part of the DXLab Suite) as an option 
for CW generation with those radios that support it.  WinWarbler's 
macro facility can also use the KY command for stored messages. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
> Sent: Wednesday, August 22, 2007 8:43 AM
> To: David Woolley
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] KIO2: Programming message memories 
> not possible?
> 
> 
> David,
> 
> I do believe that is correct, but take a look at the KY 
> command.  With a 
> computer connected, you can store many, many CW messages in 
> the computer 
> as ASCII text and send them using the KY command.
> 
> Unfortunately, this command is K2 unique and is not supported 
> by any of 
> the popular rig control programs - but if you are writing 
> your own app, 
> it may be a good thing to include. 
> 
> I believe the K3 includes the same command, so perhaps it will be 
> supported in the future.
> 
> 73,
> Don W3FPR
> 
> David Woolley wrote:
> > Am I correct in my reading of the programming document in 
> saying that 
> > one cannot program the message memories from the computer, but can 
> > only do so with a paddle key?
> >