[Elecraft] Capacitor Question

[Don Wilhelm]

Matt,

Yes, the pads are a bit wide for the cap, but you do have the correct 
one.  Yes, be certain the top of it is below the 2D connector level by 
bending it down or whatever other means you choose to employ.

73,
Don W3FPR

Matt Palmer wrote:
> probably just a little paranoia on my part but:
>
> on the K2 c133 is listed in the manual as a 104 (.1) and states to
> bend it down, however the 104's are short and the pad is too large for
> this cap, is this still the correct capacitor.
>
>