[Elecraft] 14.03 MHz Continuous Tone/Carrier?@#$

[Alan Biocca]

I have two 100 megabit switches within six feet of the radio, and can 
barely hear the spur on 14.030, so experience varies. Two spurs at 
21.055 are below s0 with preamp #2 on. Wonder where the gigabit spurs 
are, that may be another solution, though gig switches are 100 
compatible as well..

-- Alan, wb6zqz

At 04:40 PM 8/14/2007, KJ3D wrote:
>  Hi Group,
>
>I have this problem too.  I fixed a lot of the initial interference (mostly
>hash) by going from wired to wireless, but I still have these CW signals on
>several bands.
>
>I can't figure out how to switch my gear to limit it to 10 mB.   I'm using a
>D-Link wireless G airport/access point.
>
>Any help?
>
>Thanks,
>
>Tom, klj3d
>
>
>
>-----Original Message-----
>From: elecraft-bounces at mailman.qth.net
>[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Leigh L Klotz, Jr.
>Sent: Tuesday, August 14, 2007 6:25 PM
>To: Elecraft at mailman.qth.net
>Subject: Re: [Elecraft] 14.03 MHz Continuous Tone/Carrier?@#$
>
>Also 21.060.  It is from 100 megabit ethernwt devices.  Switch your shack to
>10 megabit ethernet and it will be only your neighbors QRP transmitters with
>end-fed long wire antennas (CAT5 wiring) that you hear.
>Leigh/WA5ZNU
>
>_