[Elecraft] K3 question re dual receive

[Joe Subich, W4TV]

> Yes, with the KXV3, you can select the RX antenna for either, or both,
> receivers.

Can you select Main (transmit) antenna on the subreceiver and receive 
(KXV3 aux) antenna on the main receiver at the same time?  Or are you 
limited to transmit antenna on the Main receiver and RX antenna on the 
sub receiver if you are not using the same antenna for both receivers? 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of J. 
> Edward (Ed) Muns
> Sent: Thursday, August 09, 2007 10:55 AM
> To: 'Bill Tippett'
> Cc: elecraft at mailman.qth.net
> Subject: RE: [Elecraft] K3 question re dual receive
> 
> 
> > N6KR:
> >  >The KRX3 subreceiver can either share the main receiver's 
> > RF path or get its signal from the unused KAT3 ATU antenna jack.
> > 
> >          Can't we use the RX antenna port on the $79 KXV3?
> 
> Yes, with the KXV3, you can select the RX antenna for either, or both,
> receivers.
> 
> 73,
> Ed - W0YK
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
>