[Elecraft] K2: Number of turns on T3: text and photo disagree

[Tom McCulloch]

Don and all,
 What des T3 do?  If it has 10 turns should I pull it and make it 5?
thanks
tom
WB2QDG
K2 1103

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: "David Woolley" <forums at david-woolley.me.uk>
Cc: <elecraft at mailman.qth.net>
Sent: Wednesday, August 01, 2007 7:01 PM
Subject: Re: [Elecraft] K2: Number of turns on T3: text and photo disagree


> David,
> 
> 5 turns is correct.  The manual text supersedes any of the diagrams. 
> Yes, it used to be 10 turns, but that was long ago.
> 
> 73,
> Don w3FPR
> 
> David Woolley wrote:
>> I've wound T3 with 5 turns, but I found I had a lot of wire left over 
>> and examination of the photographs in the manual suggest that the T3 in 
>> the specimen assembly has 10 or 11 turns.  Is 5 turns correct?
>> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com