[Elecraft] K2: Number of turns on T3: text and photo disagree

[Ron D'Eau Claire]

Hi, David:

T3 has 5 bifilar turns as shown in Figure 67 of page 71 of the Rev G manual.
That's a very old photograph (Figure 8 Appendix D) that appears to have been
left over from the K2 beta test days almost a decade ago! It's in my 2000
vintage K2 manual too, even though T3 was already a 5 turn transformer by
then. 

Thanks for mentioning it. It goes on the "fix that!" list <G>. 

Ron AC7AC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David Woolley
Sent: Wednesday, August 01, 2007 3:53 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K2: Number of turns on T3: text and photo disagree


I've wound T3 with 5 turns, but I found I had a lot of wire left over 
and examination of the photographs in the manual suggest that the T3 in 
the specimen assembly has 10 or 11 turns.  Is 5 turns correct?

-- 
David Woolley