[Elecraft] Possibly broken K2

[Soaring Eagles]

Hi!

I just finished the KPA100. All the tests were great. Final assembly was 
fine. I hooked it up to my antenna through my SGC MAC-200. Hit the tune 
button, the tuner started doing it's thing, and then the radio just up and 
died. The basic K2 with SSB, DSP, 60 and 160 mtr options had been working 
fine up to this point.

I tried to use the barrel connector for power, but get nothing there 
either. I do get a slight pop from the speaker when the power is connected 
to the power pole connectors when I switch the radio on, but nothing else 
comes on. No lights, sounds, etc.

I will pull the PA cover off in the morning and see if going with the QRP 
cover will make a difference and also check for things that don't look 
right. However, I didn't see or smell any smoke.

Thanks for any help

Jim, WD9HBC
K2 #5757