[Elecraft] K1 Problem

[Don Wilhelm]

Bob,

If it is working with the new power supply and antenna, why do you need 
further comments? - *Congratulations* on your success.

The original antenna may have been out of range of the tuner's 
capability - you didn't specify the before and after antenna parameters 
or situation, so all I can do is guess about it.

73,
Don W3FPR

Bob P wrote:
> 
> I have a problem I think I solved, but would like a few comments.
> 
> I installed a new K1 2 Band Board and all things went smooth till I 
> tried to send with ATU
> 
> First it would send on 40 meters, then at 80 I got a short chirp and a 
> low buzz intread of 800 Hz sound
> 
> So I found a bigger power supply ( 2a vs my old .400 millia) and also 
> changed the antenna and all things are find.
> 
> Life is Short, Learn Morse Code and have fun.
> 
> Bob in Ohio, KC8IPQ
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
>