[Elecraft] K3-style knob

[Ken Kopp]

I'll buy one!  The sharp edge on the K2's knob and the lack of
a finger-dimple ... I did buy one of the after-market dimples ... is
about the ony thing I've found to grump about ... oh yes, there is
the "buried" clock display .. (:-)) Need to look and see if the K3
has a visible clock display.

73! Ken Kopp - K0PP
k0pp at arrl.net
.
----- Original Message ----- 
From: wayne burdick
To: Ken Kopp
Cc: elecraft at mailman.qth.net
Sent: Saturday, 28 April, 2007 16:50
Subject: Re: [Elecraft] K3 Knobs and encoders


I haven't tried putting a K3 VFO A knob on a K2. It's quite a bit
larger, which means it would overlap the LCD's bottom edge, and would
likely interfere with the knobs at the left.

The K3's VFO B knob is smaller than the K2's present VFO A knob.

Now, all that said, we should be able to design a "little
brother"-sized knob for the K2 that looks like the K3 knob.
Unfortunately I won't be able to get to that for awhile.

73,
Wayne


On Apr 28, 2007, at 9:09 AM, Ken Kopp wrote:

> I'll ask for all of us who have K2's and want to at least sniff the 
> wine ...
> What is/are the cost/s and part #'s for the two K3 tunng knobs?
>
> Since the K3's tuning knobs are differnet sizes, which is the 
> "logical"
> replacement for the K2's knob?
>
> I was gonna call Yaesu Monday, BTW.
>
> 73! Ken Kopp - K0PP
> K2/100 #5665
> k0pp at arrl.net
>
>
>
>

---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com