Fw: [Elecraft] Announcing the Elecraft K3 Transceiver: 10/100W, 160-6m, Assembled or Kit

[Lyle Johnson]

Hello Simon!

> Looking at the available information am I right in thinking that by 
> adding a sub-receiver I can use a common antenna for 15 and 10m and get 
> separate audio via the rear stereo connector?

You can have the subreceiver listen on the same antenna as the main 
receiver, or an a different antenna assuming the KAT3 ATU is installed.

With the KXV3 option you can have it listen on a separate (third) 
antenna, or add additional filtering in-line.

You can combine the receiver audio, or split it so main is left and sub 
is right.  You can get the stereo output from speakers, front headphones 
or rear headphones.  YOU can also get it along with one of these from 
the PC line output jack.


> Simon 'I do not need another radio ever' HB9DRV

Sure you do!  You just didn't know it until today :-)

73,

Lyle KK7P

PS - thank you for your work on HRD and DM780, Simon.  The K3 is fully 
controllable over the serial interface. There is nothing you can control 
from the front panel that you won't be able to control remotely :-)