[Elecraft] K2 and Digital Modes
Don Wilhelm
w3fpr at earthlink.net
Sun Apr 8 09:58:31 EDT 2007
Sorry, Morning fumble-fingers. Try instead http://w3fpr.qrpradio.com
73,
Don W3FPR
KJ3D wrote:
> Hi Don,
>
> FYI: Your page link is misspelled (as is misspelled, probably - I never can
> remember how many s's).
>
> Tom
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
> Sent: Sunday, April 08, 2007 8:54 AM
> To: Gary McKelvie
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K2 and Digital Modes
>
> There is no known problem for using the K2 with any of the soundcard
> interfaces as far as I know. Most interface boxes allow for configuring
> to the proper microphone cabling (even if they offer special cables).
> And the K2 can be configured to use most any microphone wiring scheme.
>
> The K2 audio that is fed to the interface card is quite another decision.
> The headphone jack and the external speaker jacks are easy candidates, but
> will vary with the setting of the AF Gain control (easy enough to adjust by
> looking at the waterfall display background color), but if you want an
> independent fixed audio output, my K2 Fixed Audio board is one solution.
> See my website > http://w3fpr.qrprqdio.com (I no longer have kits, but I
> still have a few boards available).
> For the K2/100 the board can be mounted between the front panel and the
> control board.
>
> 73,
> Don W3FPR
>
>
> Gary McKelvie wrote:
>> Hi to the List,
>>
>> I'm thinking of buying the kit for the K2 with the 100 watt PA. I will
>> mainly be operating on Digital modes such as PSK 31 MFSK 16 RTTY and
>> Hellschreiber. I will be using a Tigertronics SL 1+ interface but was
>> wondering if there are any known problems with the K2 and any or all
>> of these modes before I buy the Kit and start building.
>>
>> Regards
>> Gary G7USC
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
More information about the Elecraft
mailing list