[Elecraft] K2 no receive . . . where to start?

[David Wilburn]

No receive as in dead, no noises, or no receive as in I do not hear a 
signal where I think I should?  Do you hear the birdie at 7 Mhz?

David Wilburn
dave.wilburn at verizon.net
K4DGW
K2 #5982


Mike Geddes wrote:
> Finishing up K2 6042 today.  Have fine output on all bands, but no receive!  I did use another HF rig to create signal for alignment . . . and I did hear that.  I can also hear SPOT, so think amp is okay. But nothing from antenna. For reference, I connected my K1 to same antenna and receive was fine.  I checked voltage at anode of D6 on the K2 and it is fine.  Not sure where to go from here. Any suggestions?
> 
> Thanks and  73,
> Mike
> N4JX
> 
> K1/4  2319 on the air
> K2/100  6042 under construction!
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>