Subject: [Elecraft] upgrading firmware

[Rob Falkingham]

 Chris: If you have the KIO2 module installed in your K2, there is a program
out there that will read all your configurations and save them for later 
reinstall. Do a google searce for K2Z (not the ham). A fellow from the UK
wrote the software.

Gud luck.
Rob K4UD K2 1391, KX1 334
------------------ORIGINAL MSG--------------------------------------------
Message: 9
Date: Wed, 4 Apr 2007 11:40:48 -0700 (PDT)
From: Chris Kantarjiev <cak at dimebank.com>
Subject: [Elecraft] upgrading firmware
To: elecraft at mailman.qth.net
Message-ID: <200704041840.l34Iem5a019401 at moose.dimebank.com>

Installing KDSP2 has encouraged me to finally upgrade my firmware and IOC.
That means that I have to "write down everything that might get
destroyed"...
but I don't see a good list of just what that might be!

Suggestion to Elecraft: please add a fill-in-the-blanks table to 
the firmware instructions, to encourage owners to track down all the 
values.

Question for everyone - is there such a table already out there? I wrote
down all the top level menu settings and went through CAL FIL for
four "modes" - CW, LSB, USB, CW REV - four filters each with two settings.

Anything else?

73 de chris K6DBG
----------------------------------------------------------------------------
-----------