[Elecraft] upgrading firmware

[Don Wilhelm]

Chris,

Indeed such a table does exist.  It appears with the 'A to B' upgrade 
instructions.  I do not believe the table of firmware settings to be 
recorded has ever been extracted from that document, but you can 
download the full A to B instructions from the Elecraft website -> 
http://www.elecraft.com/manual/k2a2binstr.pdf

Depending on your current firmware level, the settings may be retained, 
but in any case it is a REALLY GOOD IDEA to record your settings just in 
case ...

73,
Don W3FPR


Chris Kantarjiev wrote:
> Installing KDSP2 has encouraged me to finally upgrade my firmware and IOC.
> That means that I have to "write down everything that might get destroyed"...
> but I don't see a good list of just what that might be!
> 
> Suggestion to Elecraft: please add a fill-in-the-blanks table to 
> the firmware instructions, to encourage owners to track down all the 
> values.
> 
> Question for everyone - is there such a table already out there? I wrote
> down all the top level menu settings and went through CAL FIL for
> four "modes" - CW, LSB, USB, CW REV - four filters each with two settings.
> 
> Anything else?
> 
> 73 de chris K6DBG