[Elecraft] K2 CW filter alignment

[Tom Hammond]

Sam:

>>Then I read on page 9 and it says *if* the BFO is on the wrong 
>>side, (which the DAC readings would seem to indicate), one or more 
>>filter setting would show a shift of the center freq and be more than 200hz
>
>*correction that was meant to say 20 hz off*
>
>>off. All the filter settings are dead on, no vfo changes needed 
>>when cycling thru the 4 settings.

Generally, if one or more filters is set to the opposite sideband, 
tuning will actually be closer to 800Hz-2kHz, depending upon the 
Sidetone selected.

73,

Tom