[Elecraft] High current on 20 meters

[Bill Carpenter]

My K2/100 flashes the High Current warning on 20 meters.  This is the only 
band it happens on.  The current is 3.98 and power 97 watts, much higher 
current and lower power than all other bands.  Do I need to re-align C21 and 
C23 or could there be something else wrong?  Could the problem be a 
mis-alignment of R26 and R27 in the KPA100?  Again, 20 meters is the only 
band affected.  All other bands are no higher than 3.00.   I'm using an 
Astron RS20-A power supply.

Thanks and 73,

Bill NZ0T