[Elecraft] RE: Pelican case for just the K2

[Bill NY9H]

I use a 1450....actually 2 of them....

Originally  I had hoped to have thew K2 face out the front,.,,, can't 
be done , the radio must sit sideways,,,, otherwise there is not 
enough protection ... AND THE SCREW FROM THE VENT WILL WACK THE TUNING KNOB

The set sits upside down , and the bail is the way to remove it and 
set it back into the case,.,,,

I have ended up with two    1 for the k2  1 for the ec2 ka/kt100....


in the lid area I have enough wire/ antenna as well as a kyocera
Iridium satellite telephone solar panel & don brown controller,,,,
a palm paddle & 20 amp ssbcw only  12 vdc supply ,,
(in case I use the second case with the ka/kt100)....

i'll try to get some pix on line...

bill


At 11:06 AM 9/11/2006, Thomas Beltran wrote: