[Elecraft] k2 antenna connector

[wd4lst at windstream.net]

Rick,
Amphenol part number 6775 is a BNC plug for RG8/213. Newark electronics has them. They are pretty pricey (~30 + shipping), but would keep you from having to use adapters and excess connectors.
Last time I used RG213 with my K1, I had a hard time keeping the K1 on the table - You could suspend it off the end of the coax.
73s,
Pete
> 
> From: "Rick Dettinger" <k7mw at cmc.net>
> Date: 2006/11/21 Tue AM 10:24:40 CST
> To: <d.cutter at ntlworld.com>,  "David Pratt" <david at g4dmp.fsnet.co.uk>, 
> 	<elecraft at mailman.qth.net>
> Subject: Re: Re: [Elecraft] k2 antenna connector

> The problem is the connector on the cable that comes into the shack, as even
> (especially) QRP stations benefit from the low loss available with large
> coax.  I need to use an intermediate RG 58 cable with a BNC plug on one end

> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

Pete Axson
WD4LST
17901 NE 18th Ave
Citra, FL 32113