[Elecraft] Peaking L34 (IF amplifier)

[David C Dawson]

It is done.
Thanks.
On Sat, Nov 18, 2006 at 08:09:35PM -0500, Don Wilhelm wrote:
> Ron is quite correct.  If no peak can be discerned, just set the slug 1 to 1
> 1/2 turns in from the top of the can and be satisfied - alternately, as Ron
> stated, 'in the general vicinity of the peak'.
> 
> 73,
> Don W3FPR
> 
> > -----Original Message-----
> >
> > It's important to remember that the effect of L34 on the
> > performance of the
> > K2 is as subtle as the peak. That is, the effect on receiver
> > performance is
> > negligible as long as L34 is set somewhere in the general vicinity of the
> > "peak".
> >
> > Ron AC7AC
> >
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

-- 
David Dawson

A strong conviction that something must be done is the parent of many
bad measures.
                -- Daniel Webster