[Elecraft] Peaking L34 (IF amplifier)

[David C Dawson]

On Sun, Nov 19, 2006 at 09:19:34AM -0600, Tom Hammond wrote:
> David:
> 
> >> For finding the peak, either will work, however, for finding the best
> >> Signal-to-noise ratio, the xanalyser will probably be better because
> >> it should allow you to see both the signal AND the background noise,
> >> so you can tell when he background noise is dropping faster than 
> >the signal.
> >
> >That's what I thought.
> >That should be fairly easy for me to set up.
> 
> The s/n ratio setting is usually only about 1/2-3/4 turn in from the 
> point of max received signal. Run thru it a few times, to make sue 
> you're seeing what you think you're seeing... and if you can't see 
> it, try to hit the point of max. rx sig and then turn the slug in 
> about 1/2 turn.
Yes, that is what I did.
Thanks.
> 
> 73,
> 
> Tom
> 

-- 
David Dawson

A strong conviction that something must be done is the parent of many
bad measures.
                -- Daniel Webster