[Elecraft] RE :KPA100 upgrade and KAT100 problem

[Brent Sutphin]

I just ordered a new KAT100 for my K2/100.  There seems to be a really big 
problem with this combination, I'm almost afraid to build it.

Brent  WB4X

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: "Ken K3IU" <kenk3iu at cox.net>; <w3fpr at arrl.net>; "'John Huffman'" 
<hjohnc at adelphia.net>; <elecraft at mailman.qth.net>
Sent: Sunday, November 19, 2006 5:07 PM
Subject: RE: [Elecraft] RE :KPA100 upgrade and KAT100 problem


> Thanks for that info Ken.  I pulled the part number from the manual 
> proper.
> When ordering parts, it is a good idea to include the part description in
> addition to the part number - there is a much better chance that someone
> will pick up on changes like that.
>
> 73,
> Don W3FPR
>
>> -----Original Message-----
>>
>> The correct part number for the "good" 1.6 ohm resistor is E500177 per
>> errata sheet for KPA100UPKT.
>> 73, Ken K3IU
>>
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com