[Elecraft] KPA100 to Computer problem

[Vic K2VCO]

J F wrote:

> I've a minor problem with K2 #4455 and KPA100 talking
> to my computer (N1MM). I'm using a known good cable
> between the rig and the computer, alas N1MM does not
> "see" the radio. It was an older KPA, but updated with
> the 1.10 chip (rev C).

Hi Julius,

1) The cable, of course, is a cable made according to the specs in the 
KPA100 manual and not a standard RS232, cable, right?

2) PORT needs to be ON in the menu.

3) Have you tried talking to the K2 using a terminal program on the 
computer?
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco