[Elecraft] WA3WSJ: KX1 K6XX CW Indicator Install

[Edward R. Breneiser]

Hello all,

I finished my K6XX Visual Indicator Kit install today. Here is what I
found to work best. I installed an SMD kit and used two 47k resistors to
form a voltage divider to the audio input pin of the K6XX Kit Board.
With this setup I have a rather smooth LED action when tuning upon a
signal. I have a few false blinks, but not many -hi! 


http://www.wa3wsj.com/KX1k6xx.html


72,
Ed,WA3WSJ