[Elecraft] Hakko 808 tip?

[John Reiser]

Hi Doug,

Ken, K3IU kindly sent me this link.

http://shop.kiesub.com/Search.bok?category=Solder+Equipment%3ADesolder+N

73,

John, W2GW

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: "Doug Person" <Doug at Northroutt.net>
Cc: <elecraft at mailman.qth.net>
Sent: Wednesday, November 15, 2006 7:21 AM
Subject: RE: [Elecraft] Hakko 808 tip?


> Doug,
>
> Well, I just checked and they do not list it on their website.  I would 
> give
> them a phone call to see if they still carry it.  You will find pleasant
> folks at the other end of the phone line.
>
> 73,
> Don W3FPR
>
>> -----Original Message-----
>>
>> Don - I wasn't able to find the A1394 tip at your suggested link.  I
>> even used their Quick Search with no joy.  I think I could use one of
>> those tips, too.
>>
>> 73, Doug -- K0DXV
>>
>> Don Wilhelm wrote:
>>
>> > The Hakko A1394 extra long 1.0mm nozzle does a good job with the close
>> > clearances found in the KX1.  You can purchase he tips at
>> > www.hmcelectronics.com and a variety of other places.
>> >
>> > This long slender is not for normal use, but its long reach is
>> necessary for
>> > use in close quarters such as when doing the de-soldering for
>> the KXB3080
>> > option.
>> >
>> > 73,
>> > Don W3FPR
>> >
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>