[Elecraft] Help - XFIL doesn't work

[Solosko, Robert B (Bob)]

Keith,

	I did add the Rework Eliminators when I built the K2, and it made adding all of the internal options a breeze (KDSP2, KNB2, K160RX, KSB2 and now the KPA100) - I highly recommend them when building a K2. The problem I encountered with the KPA100 was my own inattentiveness when installing the KPA100 into the K2 and not watching where the 12V power wire from the KPA100 was (it just plugs into the K2 - nothing related to the REs).

Bob

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Darwin, Keith
Sent: Monday, November 13, 2006 2:33 PM
To: elecraft at mailman.qth.net
Subject: RE: [Elecraft] Help - XFIL doesn't work


I wonder, once this gets figured out, if we'll find that having the
Rework Eliminators (so as to avoid pulling the K2 board out once it is
done) would have avoided the problem ...

Just thinking.  Enjoy it as I'm not always known to do it :-)

- Keith N1AS - 

-----Original Message-----
From: Solosko, Robert B (Bob)
Sent: Monday, November 13, 2006 10:43 AM

... I finished the KPA100 over the weekend ... and in the process, broke
something in the K2.

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com