[Elecraft] KBT2 charging question

[Tom McCulloch]

I couldn't get thru to the BAMA site but found the schematics at 
http://www.repeater-builder.com/astron/astron-index.html

I have the RS-35M, and wasn't aware of the 13.8 volts needed for full 
charge, so I'll be \inside the Astron this weekend. (looks like R 104 on the 
RS-35M)

Thanks for the info.

Tom
WB2QDG
K2 1103



----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at earthlink.net>
To: "Mike Markowski" <mm at UDel.Edu>; <Elecraft at mailman.qth.net>
Sent: Thursday, November 02, 2006 5:37 PM
Subject: RE: [Elecraft] KBT2 charging question


> Mike,
>
> BAMA has Astron schematics, see if your supply is in the list there
> http://bama.sbc.edu/astron.htm
>
> The K2 will provide full band coverage as well as SSB, and double the 
> power,
> but it weighs more - the decision will have to be based on your wnats and
> desires.
>
> 73,
> Don W3FPR
>
>> -----Original Message-----
>>
>> Thanks, Don & Tom, for your help.  Now I'll scout around the web
>> for the Astron
>> schematic and try to find that pot.
>>
>> I'm still debating whether to build a K1 to bring along to places
>> with me or to
>> build a fully kitted K2 QRP cover (ant. tuner and battery).  The
>> K2 cover is
>> cheaper, the K1 building is more fun.
>>
>> 73,
>> Mike  ab3ap
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com