[Elecraft] K2 Voltage Problem Initial Check

[himself at nvtel.net]

Finally got to the first Alignment and Test, Part 1 on my K2.
Upon power up the display reads E25.5 i.52 for the voltage display.  All the other initial menu driven checks are ok.  Can't find why the voltage is so high.  Checked both 5 and 8 volt regulators and thier ok.  RP1 and RP2 are not swapped.  Built the internal voltage probe and it didn't work either. Spent 3 hours troubleshooting so far.

Any one with an idea.

Stephen