[Elecraft] KAT2 Lo-P message

[Dan Barker]

Build yourself an attenuator (3 or 4db should be fine), and the K2 will be
happy and the amp will be happy and the KAT2 will match all (well half - the
attenuator to amp side needs to be close to 50 ohms. The K2 side should be
too).

Dan / WG4S / K2 #2456

<snip>
If I set the power on the K2 much above 1-2 watts, the linear doesn't seem
to like it ie trips out.
</snip>