[Elecraft] No audio from speaker on K2

[Darwin, Keith]

Gee Ken, I duhno, but here are some troubleshooting ideas.

Rule #1:  If it was working but now isn't, look at what changed.  I
don't care if what changed "has nothing to do with it", start checking
there.

Rule #2:  Follow the clues.  Gather clues and follow them.  Don't jump
to a conclusion about what it is (I've change the part 3 times and the
rig STILL doesn't work) or what it isn't.

Rule #3:  Ask Don.


Try taking all those accessories out.  Do you still have output?  Then
put them in one at a time.  This will at least narrow the search.

- Keith -


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Kennet4723 at aol.com
Sent: Tuesday, May 16, 2006 9:07 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] No audio from speaker on K2

Ok---this might be elementary to many but I can't seem to find the
problem.  
After I built the NB board and plugged it in along with the SSB board
and plugged  in  the ATU cable and  the internal battery cable, I
plugged in the speaker cable, Now there is no audio from the speaker,
but there is audio from the headphones. I checked the speaker and cable
with a ohmmeter and things look ok. Elecraft suggusted that the
headphone jack might be bad, but I had never used it before this and the
audio was ok from the speaker then.  Everything else is working fine
including the NB  Has anyone else experienced this problem?  I might add
that I did not build this K2 but aquired it total built and working 100%
Any help would be appreciated.

Ken   K1DWZ
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com