[Elecraft] K2 Encoder - bare wires?

[Leigh L Klotz, Jr.]

Fred,
Be light and quick when soldering the bare wires to the encoder.  Too 
much rework or too much soldering can melt the plastic and internals on 
the encoder, making for an expensive replacement (not that I, uh, have 
any, uh, experience in this are, of course).
Leigh/WA5ZNU
On Thu, 30 Mar 2006 5:38 am, Fred (FL) wrote:
> K2 Manual calls out "cut 4 hookup wires, 1-1/2" long, remove 
> insulation" .....