[Elecraft] Filter adjustments

[Vic K2VCO]

Don Wilhelm wrote:

> You can try changing the width of the filter and the BFO setting by one
> 'click' or so to force new values to be written into the EEPROM, ome folks
> have reported that they have eliminated the pitch shift in that manner.  If
> the BFO frequency is on the edge of one of the digital value steps, forcing
> it to the next value will help, but this is trial and error, so I offer no
> guarantee.

I do it like this:  Let's say the 400 Hz filter setting results in a 
pitch slightly different from the others.  Then I change the filter 
width to be either 380 or 420 Hz. and move the BFO setting one click to 
recenter it.  I have always been able to get them all the same by this 
method.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco