[Elecraft] KSB2 Missing parts

[Don Wilhelm]

Steve,

Unless something has changed at Elecraft packaging recently, those parts are
mixed in with all the rest (not packaged in a separate envelope).  So if you
have sorted all the parts and they are still not present, a note to
mailto:parts at elecraft.com would seem to be in order.

Unless of course, you had extracted them earlier and already installed them
on the front panel board - check for the mic header on the back of the Front
Panel board.

73,
Don W3FPR

> -----Original Message-----
>
> Hi, I have just checked my inventory for the KSB2 and seem to be short
> of all of the components for mounting on the front panel board, i.e. : -
>
> P1, c4-c8,q3,rp3,rbias and R13,
>
> It seems to me that the parts must all have been in 1 envelope and this
> was omitted from my kit. Before I contact Elecraft for replacements I
> wonder if someone could confirm this so I can check the shack to see if
> the envelope has been stolen by the underpants gnomes.
>
> Thanks,
>
> Steve G0XAR
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.3.1/292 - Release Date: 3/24/2006
>
>