[Elecraft] K-2 #5423

[Phillip Buckholdt]

Hi All:

    Just completed alignment & test Part I but, have one glitch. The 5th 
digit in the display, the top and bottom segment do not light. All other 
segments change OK. I have checked and reworked all pins on the display and 
solder joints seem fine. All pins on the display driver are seated in the 
socket and not bent. Also the last digit the top segment IS lit in CW mode 
only.

Any one have any suggestions on what to check as to voltages, resistance 
checks ect. Before I installed the LCD, I double, triple checked the socket 
for U1.

       Tnx Phil K8MBY