[Elecraft] K2 SPLIT MODE AND LOGGER 32

[Don Wilhelm]

Chris,

I have to take issue with the response you received from Geoff -  The K2
command set is a SUPERSET of the Kenwood command set.  The K2 also
implements commands that would allow the K2 to remain in split if they are
properly used, but the program authors have chosen not to support the K2
separately from Kenwood, and have also chosen not to support split
operation.

Again, the cancelling of split is NOT a function of the K2, but a function
of the way Logger 32 has chosen to handle the K2 --- in other words Logger
32 issues explicit commands that cancel split, and it is not necessary to do
that (i.e. the program IS explicitly cancelling split).

73,
Don W3FPR


> -----Original Message-----
>....Response to Chris from Geoff .....

> The answer to your question is basically no.  The K2 uses the same
> command set as the Kenwood series of radios and in that case also the
> FR command will take the set out of split mode.  It is a function of
> the radio and not Logger32.
>
>