[Elecraft] K2 SPLIT AND DX CLUSTER SPOTS WITH LOGGER 32 & N1MM

[Chris Page]

Thanks for your quick reply Dan.

Logger 32 has a "Radio Debug Window" which shows the commands and 
replies going between Logger 32 and the K2.

When I click on a DX spot, Logger 32 sends the following message to 
the K2:

Set Radio Freq/Mode : FR0;FA00018080000;MD3;FA00018080000;

73 de Chris, G4BUE

On 13 Mar 2006 at 6:28, Dan Barker wrote:

> What commands do these programs send to the K2 when you "click on a
> spot"? That is the first question. If the documentation doesn't say,
> and the vendor won't tell, then you'll have to put a sniffer on it.
> 
> Only after you find a command string that has an unexpected result can
> you say there is a problem with the K2. My belief is that the software
> is sending commands to force the K2 out of split.
> 
> This could be the result of an error on the part of the programmer
> (unlikely) or the use of macros designed for other radios than the K2
> (most likely).
> 
> In any case, more documentation is needed before any problem has even
> been described!
> 
> Dan / WG4S / K2 #2456
> 
> <snip>
> when I click onto a Cluster spot, the K2 correctly
> goes to the frequency and mode of the spot, but the SPLIT option is
> cancelled and the K2 returns to its default setting of no SPLIT.
> </snip>
> 
> <snip>The problem must therefore be
> with the design of the K2 and not the logging program.
> </snip>