[Elecraft] Remote control software

[Leigh L Klotz, Jr.]

I believe the programming manual suggests this be done with the front 
panel emulation mode, so the sequence would be to enter that mode, press 
MENU, press BAND- to get to CAL, Press Menu, Press BAND - to get to FIL, 
press Menu, etc.  It is probably OK for an automated DSP program for 
aligniing the filters, but it may be a bit frantic for normal use.
Leigh/WA5ZNU
On Thu, 2 Mar 2006 1:11 pm, Simon Brown (HB9DRV) wrote:
> From: "Simon Brown" <simon.brown at kns.ch>
> To: <elecraft at mailman.qth.net>
> Sent: Thursday, March 02, 2006 10:07 PM
> Subject: Re: [Elecraft] Remote control software
>
>
> Looking at the docs I don't see any way of doing this. If I am wrong 
> let me know - I'll add it to HRD.
>
> Simon Brown
> ---
> http://blog.hb9drv.ch/
>
> "Programming today is a race between software engineers striving to 
> build
> bigger and better idiot-proof programs, and the Universe trying to 
> produce
> bigger and better idiots. So far the Universe is winning." -- Rich 
> Cook.
>
>> ----- Original Message ----- From: <recarter at adelphia.net>
>>
>>
>>> Paul
>>> I can't really test this since I don't have my KPA100 completed yet.  
>>> I poked around with Ham Radio Delux as much as I could, and I can't 
>>> seem to find any method of setting the filters (both XFIL and AFDSP) 
>>> on the K2. I don't mean selecting, I mean setting.  This would mean 
>>> filter low freq and bandwidth, and various DSP constant settings.  
>>> There doesn't appear to be any way to set most of the menu selections 
>>> including these filter settings.  If I am incorrect, please let me 
>>> know.
>>>
>>> Thanks
>>> Rich
>>
>